Brammo Owners Forum

Brammo Empulse Discussion => Brammo Empulse Mods => Topic started by: 7racer on April 09, 2013, 08:26:27 PM

Title: Anyone interested in a "custom" carbon fiber license plate frame?
Post by: 7racer on April 09, 2013, 08:26:27 PM

I think it would be a great match to the CF on the Empulse R.  Plus you can get any logo, saying you want on it.

There is a girl "frips girl" that has been on the GT-R forum that does it and I asked her if she could make some for a motorcycle.

Anyone interested?

here is the GT-R thread to see some of her work.
http://www.gtrlife.com/forums/topic/63487-cf-license-plate-frame/ (http://www.gtrlife.com/forums/topic/63487-cf-license-plate-frame/)

Title: Re: Anyone interested in a "custom" carbon fiber license plate frame?
Post by: frodus on April 09, 2013, 08:41:27 PM

I'd be down for some more bling depending on how much.

Title: Re: Anyone interested in a "custom" carbon fiber license plate frame?
Post by: Shinysideup on April 09, 2013, 11:38:06 PM

Or, for cheap with no message:

http://www.ebay.com/itm/Motorcycle-Real-100-Carbon-Fiber-License-Plate-Frame-Orignal-3K-TWILL-JDM-FF-/261183971561?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3ccfc720e9 (http://www.ebay.com/itm/Motorcycle-Real-100-Carbon-Fiber-License-Plate-Frame-Orignal-3K-TWILL-JDM-FF-/261183971561?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3ccfc720e9)

Title: Re: Anyone interested in a "custom" carbon fiber license plate frame?
Post by: Shinysideup on April 13, 2013, 04:16:58 PM

And here's the eBay one installed:

http://www.flickr.com/photos/10852133@N02/8646794852/#in/set-72157632567075439 (http://www.flickr.com/photos/10852133@N02/8646794852/#in/set-72157632567075439)

If you use stainless hardware, be sure to coat the machine screws in anti-seize to prevent galling which is common with this metal.

Title: Anyone interested in a "custom" carbon fiber license plate frame?
Post by: Consultec on September 24, 2015, 10:01:31 AM

Bought one from eBay.  Mounting holes aligned but won't fit unless notch slot of both side of top part.  I will redesign a space to allow it to clear. If not hack time and epoxy.

(http://images.tapatalk-cdn.com/15/09/24/309b91a6206f145c8c131b791693c520.jpg)


Sent from my iPad using Tapatalk