Brammo Owners Forum
Brammo Empulse Discussion => Brammo Empulse => Topic started by: brugja on January 03, 2018, 09:40:29 AM
-
my bike had a melted connector, wich i replaced. But my bike is completly empty, so the charger doesn't get a starting signal.
Anybody an idea? Charge it a little bit through te 12V connection with a rc lipo charger?
-
I think your bike has not enough juice to power the DC-DC converter and then all devices needed for the charge to occur. You have two solutions then :
- Externally charge your battery : you need to find a 117v battery charger wich is not an easy task.
- Provide 12V at the AUX connector with the J1772 plugged which would hopefully provide power to the charger and everything else until charged enough.