Brammo Owners Forum
General => Welcome Forum => Topic started by: Daniel Jorge on June 01, 2018, 10:29:27 AM
-
I'm from portugal and about 1 year bought the brammo, unfortunately I had some problems but they were solved.
But this time it was serious, the charging fusible box almost catch fire!!!
Can anyone help why this happens?
Thank you
Good Curves
-
Hi
I am not sure what you mean. Can you explain some more detail? Do you have pics?
-
Photo of the fuse box...
Can you see what's happening in the photo?
Thank you
-
would Brammo need to recall that???
ohw wait, no Brammo...
-
It might be time for all Brammo owners to take a look at the fusebox. You should pull the fuses and make sure there is no corrosion or evidence of heat on the fuses or the holder. Time might be allowing a little resistance to build up at the pin/socket interface causing heating. I haven't looked at the Victory, but the fusebox and wiring in that area appears to be different from the Brammo. Also, if you have a FLIR adapter for your phone, you need to look at the fusebox under load as a preemptive strike .
-
That is one scary photo right there !!!!
-
Things could be worse. Just ask Zero. :o
-
Holy C#@p Batman !!!!
-
Not to worry, Richard: That'll pound right out!
Wow, this IS scary stuff.
I'm taking the inspection suggestion seriously. I will remove all fuses and clean with emery cloth and spray with Caig Deoxit contact cleaner.
-
looks like the charger is problematic.
multi treads in this forum seem to indicate so.
especialy the wiring from the charger to the red and black connector.
-
Looks like the fuse/fusible link did it's job, will probably have to replace the whole fuse block and fuses.