Brammo Owners Forum
Brammo Empulse Discussion => Brammo Empulse Mods => Topic started by: BrammoBelgium on April 02, 2015, 07:53:57 AM
-
Hi, i made a little how to video about the conversion to LED indicators on my Brammo Empulse. I didn't use any resistor because i replaced the indicator relay with an LED indicator.
https://www.youtube.com/watch?v=mMLNpcQHcCY (https://www.youtube.com/watch?v=mMLNpcQHcCY)
-
Nice video. I didn't know they even made a relay especially to handle LED's. Slick!
-
I know it was possible for an enertia and i heard about somebody in Switzerland who did it.
It's very easy and you don't have add resistors or change your current indicator housings.
-
Thanks for the video!
I already ordered the LED's and relay.
Can you do a video for the rear/brake lights too? :-)
-
My Empulse had the led rear light from factory. So unfortunately i cannot help you with the rear light.
-
The bulbs and the installed pic. Next I need to added the relays. (http://images.tapatalk-cdn.com/15/09/24/cf52351e01b33d85bb9272f729402943.jpg)(http://images.tapatalk-cdn.com/15/09/24/c14478d6c873c48c56a00089ad8b7f49.jpg)
Sent from my iPad using Tapatalk
-
I added the relay and it fixed my led issue. (http://images.tapatalk-cdn.com/15/09/29/7d28046a3d191b9695c393efa888d09f.jpg)(http://images.tapatalk-cdn.com/15/09/29/06f860e376f416bd52723d98ca0114d7.jpg)(http://images.tapatalk-cdn.com/15/09/29/369418bfed8193f0efda275cb74fa010.jpg)
Sent from my iPad using Tapatalk