Brammo Owners Forum
Brammo Empulse Discussion => Brammo Empulse => Topic started by: Shinysideup on March 09, 2016, 10:39:26 PM
-
California freeway pothole got my front wheel today. A light pucker in the rim. Tire still holds air. But I really don't want to mess around with cast aluminum, at least on a front wheel.
Anybody know how to specify our specific 17" x 3.5" Marchesini wheel? And a good place for purchase?
Marchesini website has a configurator, but, surprise, doesn't include Brammo!
-
California freeway pothole got my front wheel today. A light pucker in the rim. Tire still holds air. But I really don't want to mess around with cast aluminum, at least on a front wheel.
Anybody know how to specify our specific 17" x 3.5" Marchesini wheel? And a good place for purchase?
Marchesini website has a configurator, but, surprise, doesn't include Brammo!
The victory website has replacement wheels in their service section. The front wheel should be common (the rear changes).
I haven't tested it yet but I'm pretty sure the 160 rear will fitt too.
Sent from my SM-G928V using Tapatalk
-
There are some companies that will repair aluminum motorcycle wheels and they guarantee their work. You might want to search the internet for such a service near you.
I have a friend who dented his BMW motorcycle's cast aluminum front wheel 20 years ago and a local mechanic hammered out the fairly large bend in the wheel using a hammer and block of wood. It has been holding air ever since. A more specialized wheel-repair company could no doubt do a much better job. ;)
New wheels are not cheap. Expect to pay at least $1000 for a new wheel and who knows how long you will have to wait to receive it? Having the wheel repaired could save you a lot of money and time and still be as safe as a new one. It is worth checking out. :)
-
Thanks, Richard. I used a block of wood and a hammer and got the bulge most of the way back in. The rim edge is about 1/8" away from the tire for about 1.5 inches in length.
Then I read in online forums that one should NEVER pound on cast aluminum/magnesium wheels. The thinking is that this metal only likes to be bent once and that hammering can degrade the crystalline structure, possibly leading to a catastrophic failure.
Part of me wants to just keep riding: no air leak and no vibration.
The other part wants to play it safe and not worry about a blowout on my front end. :-\
-
Well Shinyside, I bet there is a wheel repair specialist or two in the Bay Area. You should have them check out your wheel and see if they can repair it. I have heard of several people over the years who pounded out their aluminum rims and apparently never had a problem with a wheel or tire failure, including my friend. But it certainly wouldn't hurt to get the advice of an expert.
I seem to recall that I saw an ad recently for a motorcycle wheel repair company. I have a feeling that I saw the business-card size ad in the classified ad section (on the last pages) of the latest City Bike magazine (which would now be lining my bird's cage, if I still had any birds, or the magazine). ;)