Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Cirdec

Pages: [1]
1
Brammo Enertia FAQ / Re: Motor wiring
« on: July 23, 2018, 07:25:17 PM »
  As a reminder here the diagram for the connector for the "OLD" PMS120 from my Enertia Classic :

Front View 8 Slot connector (Delphi brand)

Ground/Big Green | Unused | Black  | Unused
Orange               | Red      | Green | White

Heinzmann Specification are here :

https://www.heinzmann.com/jdownloads/electric-and-hybrid-drives/CAT_Electric_Drives_Product_Catalogue_e.pdf#page=6

++

2
Brammo Enertia FAQ / Motor wiring
« on: July 23, 2018, 05:09:31 PM »
Hello folks,

I'm changing the Heinzmann motor of my brammo but the wiring is different from the old to the new one ... !

OLD : Ground/Big Green, Orange, Red, Green, White, Black

NEW : 2 set of wires

First set : Blue and Brown
Second set : Ground/Big Black, Blue, Brown, Black, Green, Yellow, White/Beige.

What do you think ?

Thanks !

Cirdec.

3
Brammo Enertia / Re: Enertia Classic : Unable to get GO state with "Headlight off" message
« on: March 16, 2017, 12:40:50 PM »
  **SOLVED** : After checking all the connectors it seems that a bad connection for the headlight connector was the problem.

  This week end I will post some pictures from my Enertia and the damned connector.

Thank you for your help.

Regards,

Cirdec.

++

4
Brammo Enertia / Re: Enertia Classic : Unable to get GO state with "Headlight off" message.
« on: March 16, 2017, 10:59:39 AM »
The left switch for the light is OK, just checked today :-[

When the Enertia is ON but not on GO state it is difficult to push the e-bike, the motor seems to be under voltage but nothing on the throttle, I just get a message about the throttle saying it must be in zero position ...

Any idea ?

++

5
Brammo Enertia / Re: Enertia Classic : Unable to get GO state with "Headlight off" message.
« on: March 15, 2017, 03:36:19 PM »
  The headlight is always ON, I don't have any switch to set it OFF that's why I've been a bit sarcastic. So yes the headlight switch is ON, the fuse number 3 is OK and the bulb of the headlight is OK too. But the Enertia don't get GO state because of the "Headlight Off" ... Not very clear for me.

  Could it be that when the Headlight is "Off" this mean that a power fuse is "Dead" ?

Tomorrow I will check the Sevcon fuse.


6
Brammo Enertia / Enertia Classic : Unable to get GO state with "Headlight off" message.
« on: March 15, 2017, 02:05:42 PM »
  Hello,

  Since today my Enertia Classic don't want to switch to "GO" state. She only say on the display : "Headlight off" and the discontactor won't switch to on.
  Checking the owner manual they say to correct this message : "Turn on the headlight", pretty funny, isn't it ?

  For me it seems to be like a fuse, does anyone have experienced this message ? How can I resolve this ?

Thx.

Cirdec.
 
   

7
Welcome Forum / New Enertia Rider from Paris/France.
« on: March 15, 2017, 01:30:11 PM »
  Hello folks !

Well, I'm proud to say that my stepdaughter and I we bought an used 2011 Enertia.

She drives it, I service it ;-)

More news to come.

Regards.

Pages: [1]