Brammo Owners Forum

Brammo Empulse Discussion => Brammo Empulse Mods => Topic started by: barboo on March 02, 2014, 12:18:21 PM

Title: TechSpec Tank Pro added
Post by: barboo on March 02, 2014, 12:18:21 PM
Added a TechSpec Tank Pro tank tank protector to Sparky. Matches the look of the bike and keeps scratches away.
Title: Re: TechSpec Tank Pro added
Post by: BrammoBrian on March 02, 2014, 02:05:46 PM
Nice job on applying the Stompgrip tank pads on the sides!  Did you just buy the universal large piece and cut it to shape?  I'm impressed!
Title: Re: TechSpec Tank Pro added
Post by: barboo on March 02, 2014, 02:34:39 PM
Thanks! Yep, sure did Brian. I templated it out freehand with some paper first, laid the paper on it after I cut out the template to validate fit, crossed fingers, and then cut the Stomps. Only had to trim about 1/4" from the bottom.
Title: Re: TechSpec Tank Pro added
Post by: Shinysideup on March 02, 2014, 02:36:31 PM
Lookin' good!

I'm very interested in the side pads on the Empulse, as the quick rise in the rear of the seat shoves me forward and gripping with the knees on the stock bike seems like it would be helped along with the pads.

Did you consider the Techspec C3 instead of the Stompgrip and if so, why did you choose the latter?
Title: Re: TechSpec Tank Pro added
Post by: barboo on March 02, 2014, 02:47:08 PM
Lookin' good!

I'm very interested in the side pads on the Empulse, as the quick rise in the rear of the seat shoves me forward and gripping with the knees on the stock bike seems like it would be helped along with the pads.

Did you consider the Techspec C3 instead of the Stompgrip and if so, why did you choose the latter?
Thanks! I've used both tank sidepads on multiple bikes and found the TechSpecs are more street orientated and the Stompgrips are better for track use. They're more aggressive in terms of side grip.

My street dedicated bikes tend to have TechSpecs on them and my track dedicated go the Stomp route. I'm planning on tracking this Empulse so I put Stompies on the side.
Title: Re: TechSpec Tank Pro added
Post by: Consultec on September 04, 2015, 10:13:37 AM
Can you remove it easily? Why not go with Clear?
Title: TechSpec Tank Pro added
Post by: Consultec on September 24, 2015, 09:33:55 AM
(http://images.tapatalk-cdn.com/15/09/24/58cd887160339c66795a74ac14026270.jpg)

Decide to go small carbon look.  Have a set of. Clear just in case.


Sent from my iPad using Tapatalk
Title: TechSpec Tank Pro added
Post by: Consultec on September 30, 2015, 12:58:29 AM
I decided to add a clear protective film on the sides of the tank.  This kit was from my BMW R1200C.  I trimmed the over hang after the picture was taken.(http://images.tapatalk-cdn.com/15/09/29/1187e84344c826d41c7fd43135369ccd.jpg)(http://images.tapatalk-cdn.com/15/09/29/340045d53dea64da2fd161c1241e08ff.jpg)


Sent from my iPad using Tapatalk