Brammo Owners Forum

Brammo Enertia Discussion => Brammo Enertia => Topic started by: Rocky Mountain High on October 29, 2015, 10:08:23 PM

Title: B6 error (HELP!)
Post by: Rocky Mountain High on October 29, 2015, 10:08:23 PM

I've been getting B6 errors for a couple of months on my '09 Enertia, but after turnining the key to off and waiting a couple of minutes it would go away. Now it won't go away and the bike will not turn on. I contacted Brammo service tech and was told if it's not a bad fuse, loose wire under fuse block, loose wiring harness on motor controller, then it is a bad motor controller.

I want to find out if anyone else has had a B6 error and what there experience was with fixing it. I've checked all the inexpensive possibilities, loose wire, fuse, ets. I just want to make sure we're not over looking something before I dump 2k into a 4K bike.

Thanks for any input.

Title: Re: B6 error (HELP!)
Post by: Gerhard on November 05, 2015, 02:02:45 PM

B6 = BMS Not Communicating (Disable Drive or Charge)