Brammo Enertia Discussion > Brammo Enertia Servicing
Valence battery disassembled
KaFr:
Interesting instructions for Valence battery service:
https://imgur.com/gallery/LyFE6
Brammo Enertia has another type (U1-12XP), but I think it will look very similar inside the battery.
KaFr:
Here's a more professional way to get in:
KaFr:
I decided to look inside the Valence U1-12XP battery and I shot it all.
The procedure is as follows:
1) Insert the large screwdriver into the joint under the battery cover at all corners of the battery and release the battery cover
KaFr:
2) Disconnect the red cable inside the battery connected to the positive pole
3) Disconnect the black cable inside the battery leading to the negative pole
KaFr:
4) Flip the battery cover
5) Remove the insulation from the BMS module and unscrew the module from the battery cover
Navigation
[0] Message Index
[#] Next page
Go to full version