Brammo Owners Forum
Brammo Empulse Discussion => Brammo Empulse => Topic started by: shocker on June 02, 2013, 11:58:48 AM
-
Got this system fault S65 code just right before pulling off of the driveway. What is it? It went away after a power cycle.
-
My temp owner's manual shows that S65 is a "sequence fault".
In the startup procedure, after turning the key on, if I press the starter button and turn the throttle at the same time, or turn it before the software has completed the task of making the motor available to the bike, it will throw the S65 fault. Solution, as you discovered, is simply to start over.
Makes sense that you wouldn't would the motor to become hot with an open throttle!
To avoid getting this fault, I slow down, act deliberately, and all is well. Just as Brian intended. ;)
-
My temp owner's manual shows that S65 is a "sequence fault".
Hmm, I have one of those provisional ones, and I didn't find anything. I also Googled it with no result. You would think it could just tell me to off the throttle in plain text instead of generating a code. I don't remember fiddling with the kill switch before pulling off, but I must nudged it somehow. Thanks for the lookup.