Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Athlon

Pages: [1]
1
Brammo Empulse / Chain kit for Empulse using Silent Sproket
« on: August 22, 2018, 10:14:38 AM »
Hello , i'm going to change my chain kit but I would like to try this solution ( I had it on my previous Honda Transalp and worked well)
https://www.ognibenechaintech.com/en/prodotti/6/ingranaggi-OE.html?p=1
I need some hint to work out with the producer how to mill the sproket

there is any specification around ? I checked the owner manual but don't say anything about the mounting hole and interface

thanks

2
Brammo Empulse / Working on EmpulseR POWER RACE
« on: January 12, 2015, 03:40:35 PM »
Bike is almost here , other parts are on the way , software is on the drawing board...

the next few months will be work , tuning and meeting

stay tuned



3
Brammo Empulse / Empulse R charging at 7,7 Kw ( not fast but better ) and T2 plug waterproof
« on: November 04, 2014, 07:17:40 PM »
Still waiting for my Empluse R to arrive but i'm already thinking about some modification to do at the bike.

First I'm really afraid abuto the charging plug facing up , It really look dangerous if you think about charging under heavy rain (very common where i live), anyone here already soved in some way this problem ?


Second I would like to change form Yazaky to T2 (VDE-AR-E 2623-2-2 ) charging plug , here is much more common to find T2 , so if I forget my cable at home I can borrow from some friend.
I already checked the IEC 62196 and looks like the SAE J1772 (yazaki) use the same protocol so switching to T2 shudnt be a problem from a software point of view.


The T2 allows me to use more than one phase so I can install a second Eltek on the bike , I need to duplicate the BMS packet for the second charger (I prefer to sniff the bike canbus and duplicate the bms command on a separate canbus just for the add-on charger ).

There are any issue for the battery for charghing at higher speed ( still under 1C charge so is not actualli fast charging but I don't have the cell datasheet so I cannot be sure)

Thanks Simone

Pages: [1]