Brammo Enertia Discussion > Brammo Enertia Mods
Roan's mods
Roan:
It's been a while ago. So, here are the improvements over the past months:
Color change by using rubberspray, finish isn't what I expected. Needs a redo. I will go for Motip Dupli color instead of Plasti Dip.
Small budget Puig windscreen mounted to the headlight. Takes away part of the wind pressure, my chest isn't a parachute anymore. Results in a more comfortable ride and minor gain of range.
The improvement of front and rear suspension, the best adjustment until now. Although Brammo used a premium brand shock absobers, the riding comfort was very hard and the front fork had
a small bounding range. Therefore I took the Enertia to a local specialist for service. He changed the oil (left and right struts oil level differed), air chambers increased, better sliding cups and lock rings. Ex works the lower fork cross brase was
was tightened with too much torque. Rear absorber adjusted and rear has risen. The tyre pressure front and rear is now 33 and 39 Psi.
I must say after riding 300 kilometers the suspension has been appreciably improved.
Brammofan:
I really like that windshield. Got a link, or did you get it from a shop?
Roan:
Can be ordered at louis.de:
Puig Mini Screen for CB 600 Hornet,
Sheet Puig USA:
model Naked, ref 0869
Brammofan:
Thanks, Roan!
Navigation
[0] Message Index
[*] Previous page
Go to full version