Brammo Owners Forum
Brammo Enertia Discussion => Brammo Enertia Plus => Topic started by: FrankH on March 06, 2020, 08:53:36 AM
-
Hi,
my Enertia+ had its chain and front sprocket replaced at my local dealer, but after they put everything back together the bike won't drive.
It shows a red warning light, but as my dashboard display is not working anymore, we can't see what the error message is.
The dealer doesn't have the original Brammo Enertia+ diagnostics software anymore, and the Victory version doesn't work on Enertias.
Does someone here by any chance know how to get a copy?
Or perhaps software to read the logs on the USB stick, error messages may be in there as well?
It would be a shame to have to scrap the bike because of this.
thanks, Frank
-
Hoy,
de invoerder van mijne Enertia+ en ik vermoed ook de uwe was E-LIFESTYLEBIKES.
Mijne Enertia+ heeft, weliswaar lang geleden, een software update gekregen met apparatuur van hun.
Je kan E-LIFESTYLEBIKES contacteren via hun website: http://www.e-lifestylebikes.eu/contact.htm. (http://www.e-lifestylebikes.eu/contact.htm.)
Mijne Enertia+ is ook binnen voor tandwielen en ketting, maar de winkel (Ecomobiel) is inmiddels over gegeven en is nu GO4ELECTRIC... Zal nog maar eens een mailke sturen over de status hierover.
Ik hoop dat je met deze info wat verder geraakt.
Wilfried
-
So, until now my search has not been successful. The Belgian link posted by Wilfried is out of business, the new owners of the shop he got his E+ don't have the software, and all others I asked haven't even replied.
I found the old link to Enspector, that reads Empulse log files but that doesn't really understand the logs of an Enertia+. So that's a dead end too, I fear.
Any other ideas?
-
Did you try revilo (Oliver) in Amsterdam or Marchel from Elektric motorcycles in Barneveld?
Can you pull the log files from an enertia?
maybe I can do something with it. ???
-
Did you try revilo (Oliver) in Amsterdam or Marchel from Elektric motorcycles in Barneveld?
Can you pull the log files from an enertia?
maybe I can do something with it. ???
Olivier is where my bike is, currently. He replaced the chain and front sprocket. And he doesn't have the software anymore.
Marchel replied yesterday, that he's going to have to look for the software, but hasn't found the time to do so yet.
I've attached some old logs, that I still have on my computer from back in 2013, when I had other errors. There should be an S65 error in those log files somewhere.
Thanks, Frank
-
Do you know which software you need? how it's called?
I horded anything I could find from Brammo online.
just maybe I have it :o
-
No I don't know what it's called, exactly. Something with Vehicle Diagnostics I suppose. And I don't think Brammo would have put this online somewhere, but maybe they have...
-
Hi,
I've stored that "Enertia Diagnostics Installer" SW here:
http://www.environ-systems.de/brammo-empulse-r.html (http://www.environ-systems.de/brammo-empulse-r.html)
scroll down to the bottom of the page.
Regards
Michael
-
Hi Michael, thanks a lot!
I've sent the link to my local dealer, hope he can use it!
best, Frank
-
Hoi Frank, ik heb de software, for free :)
-
I've stored that "Enertia Diagnostics Installer" SW here:
http://www.environ-systems.de/brammo-empulse-r.html (http://www.environ-systems.de/brammo-empulse-r.html)
Please, what is the password to the Enertia Diagnostics Installer Application only ZIP?