Brammo Owners Forum

Brammo Empulse Discussion => Brammo Empulse => Topic started by: Shinysideup on April 16, 2014, 08:33:23 PM

Title: H73 Service Code
Post by: Shinysideup on April 16, 2014, 08:33:23 PM

Driving on the freeway around 70 mph, I hit a substantial expansion joint over a bridge, enough for the rear shock to bottom out.

A bit later I noticed the warning on the dash: "GET SERVICE CODE H73"

Since the bike ran normally, I didn't worry about it. The code disappeared after stopping the bike at my destination and then restarting it.

Took it into Scuderia in San Francisco, who called Adam, who said it indicated a problem with the memory stick. I took the stick out and reseated it, just for good measure.

I love issues that are non-issues!

Title: Re: H73 Service Code
Post by: Jeff on April 17, 2014, 01:13:54 AM

Yeah it's the same code you get if you start the bike with the USB drive removed.

I have also had that code randomly appear a couple times while riding, but it never seems to cause any problems.  I would assume that it's not writing to the drive while the code is active though.