Brammo Owners Forum
Brammo Enertia Discussion => Brammo Enertia Mods => Topic started by: Consultec on October 03, 2015, 11:25:15 PM
-
I am planning on modifying the seat frame (cut a circle) to support external charging port. I bought all the stuff a few years ago. I decided to work on it this month.
My wiring kit.
(http://images.tapatalk-cdn.com/15/10/03/5c49c725ccc273a7e5a7e39d46c3fa68.jpg)
Side view before I bore the hole
(http://images.tapatalk-cdn.com/15/10/03/a7809a6b1624af21d5a454be66b92867.jpg)
Charging connector
(http://images.tapatalk-cdn.com/15/10/03/6c2a83ae0701289b3a745018610343f9.jpg)
Sent from my iPad using Tapatalk
-
That looks promising. I just leave the end of my cord sticking out, which works, but looks kind of compared to this. Keep us updated, please.
-
Were there any results from this?
-
Thats cutting the FRAME itself, I wouldn't put that kind of stress hole in any structural frame member. I routed the cord under the seat lock bracket and out the back with a fender bag to hold the cord tail.