Author Topic: Suggestions for Brammo.... (Read 2702 times)

Brammofan · « **Reply #15 on:** February 29, 2012, 11:47:15 AM »

There's always this option:
http://brammo.com/store/Charging_Cord-20/

\

Sure, it's $22. Sure, it's 20' long so probably won't fit under the seat.

Or, you could buy a 2 - 4' long extension cord.

Just trying to give you some options here.

Gavin · « **Reply #16 on:** February 29, 2012, 12:04:10 PM »

Yeah, i don't mind the 22 bucks, I do mind the not fitting under the seat

the current cord is what, 5 or 6 feet? Just make the standard 8 feet and all is good in the hood...

not really a bigger expense to Brammo and still fits under seat.

Gavin

protomech · « **Reply #17 on:** February 29, 2012, 12:12:04 PM »

http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10228&cs_id=1022801&p_id=5280&seq=1&format=2

$2.47 + shipping, 10 foot 18 AWG PC-type (IEC C13) power cable. Rated for 10A operation, should be fine for the Enertia.

http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10228&cs_id=1022801&p_id=5293&seq=1&format=2

Or 14 AWG, $4.73 + shipping if you want something a little heavier.

Gavin · « **Reply #18 on:** February 29, 2012, 12:17:27 PM »

not sure that has the correct bike end plug style...

and will it fit under the seat?

But thanks

Gavin

protomech · « **Reply #19 on:** February 29, 2012, 12:42:31 PM »

Can't find a picture of the socket the cable plugs into. Looks like the Brammo cable linked above is a C13, but hard to say.

@Gavin - What's the socket look like?
http://en.wikipedia.org/wiki/IEC_60320#Connector_standard_sheets

Grounded + flat back = C13, C19, or C21. C13 is by far the most common connector (in my world!), C19 and C21 are meant for higher current applications.

Gavin · « **Reply #20 on:** February 29, 2012, 12:53:52 PM »

C-19

will take a photo of it at lunch time...

gavin

Gavin · « **Reply #21 on:** February 29, 2012, 01:07:50 PM »

Of course the 2012 Enertia, Plus and Empulse could come with totally different plugs...

Gavin

protomech · « **Reply #22 on:** February 29, 2012, 01:34:54 PM »

That's true. Brammo's choice of pinout may be dictated by what charger they use.

Here's a $17 (J&R) 10 foot 14 AWG C19 to NEMA 5-15 cable.
http://www.amazon.com/Tripp-Lite-P034-010-Standard-Power/dp/B0012EK2RE/

If space is tight under the seat as-is, you may not be able to fit a longer cable under there.

Gavin · « **Reply #23 on:** February 29, 2012, 01:37:30 PM »

Thanks...that's the one...as soon as I get my plus and see what connection Brammo used, and what length cord they put in as standard, I will definitely check that out and post back...

Gavin

FreepZ · « **Reply #24 on:** February 29, 2012, 02:00:20 PM »

You don't need to replace the whole power cord. Just splice an extra couple of feet into that wire. A bit of duct tape, and you're good to go! Or you could even use one of these fancy connectors:

(P.S. If you're smart enough to read this, then I assume that you're also smart enough to know why that would be a bad idea!)

Richard230 · « **Reply #25 on:** February 29, 2012, 06:20:50 PM »

That looks like how I extended my vacuum cleaner power cord so that I could vacuum the entire house without having to unplug from the outlet.

Gavin · « **Reply #26 on:** February 29, 2012, 09:08:46 PM »

Forgot I took this photo at lunch...better late than never...kinda like the February newsletter

Gavin

Richard230 · « **Reply #27 on:** March 01, 2012, 10:42:47 AM »

That wouldn't work on my Zero, it uses round holes not square ones. I hear that round pegs won't fit into square holes - or was it the other way around?

Brammo Owners Forum

News: