Author Topic: Excerpt from Brandon (diginow supercharger):  (Read 7230 times)

Barbarossa

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • Email
Re: Excerpt from Brandon (diginow supercharger):
« Reply #15 on: June 20, 2018, 05:56:38 AM »
Iam on it, i will report in 2 weeks.

shayan

  • Enertia Master
  • ***
  • Posts: 98
    • View Profile
    • Email
Re: Excerpt from Brandon (diginow supercharger):
« Reply #16 on: June 20, 2018, 04:24:44 PM »
I wrote an email to Morgan from Diginow and here's what he had to say about SCv2.5

Quote
The Empulse will also benefit from the non Zero-specific portions of the v2.5 such as potentially more power at high voltage stations.

Quote was about 2500$ for 2 3.3kw units compared to 1950$ for SCv2.

Not sure if replacing our 3kw charger with a single 3.3kw SCv2.5 charger could give any significant decrease in charging times?

I'm contemplating on that to go for a single new 3.3SCv2.5 charger (only if it gives a significantly better charging time) since that could cut down costs quite a bit.

Leander

  • Brammovangelist
  • *****
  • Posts: 206
    • View Profile
    • Email
Re: Excerpt from Brandon (diginow supercharger):
« Reply #17 on: June 21, 2018, 03:08:51 PM »
It's only a 10% increase in power so not more than that in decreased charge  time I would think.

shayan

  • Enertia Master
  • ***
  • Posts: 98
    • View Profile
    • Email
Re: Excerpt from Brandon (diginow supercharger):
« Reply #18 on: June 21, 2018, 04:08:11 PM »
Well, the spec says that there could be upto 4kw output power in higher voltage stations. which could mean upto 40amps DC output. right now there is only 24amps DC output max. So if thats the case, it could be quite significant.

Leander

  • Brammovangelist
  • *****
  • Posts: 206
    • View Profile
    • Email
Re: Excerpt from Brandon (diginow supercharger):
« Reply #19 on: July 13, 2018, 02:09:48 PM »
I stand corrected

Otten.L

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Excerpt from Brandon (diginow supercharger):
« Reply #20 on: July 22, 2018, 01:35:34 AM »
For all of you who haven't noticed it yet:

There's an update on the charging topic in another thread. We have a pretty good solution, at least for the European customers. For the US I don't know how to handle it yet, but I'm open for suggestions:

http://brammoforum.com/index.php?topic=3642.0