Brammo Empulse Discussion > Brammo Empulse FAQ

How to control the level of coolant?

<< < (2/2)

HadesOmega:
I was curious about checking the coolant on my Empulse because the waterpump sounds louder than I remember it being.  I was going through the 2013-2014 Brammo Empulse owners manual and it mentioned this is the type of coolant you should use:
Peak Global Lifetime 50/50. 50% aqueous ethylene Glycol OAT

I looked through the Victory manual and it mentioned this:
Antifreeze 50/50 Premix

I'm thinking pretty much any automotive coolant is fine.  If I check it I will see what color mine is.  I usually use the green stuff on my cars.

Both manuals mention the coolant filler cap is "behind front cover" and it's on the right side view.  Kinda under the front of the where the big frame meets at the steering stem.

charlielopez:
I am starting to experience a bunch of temperature concerns . . . System faults B9 and S231, the temperature sensor on the lower right of display reads T709.1, and there is occasionally an odor that starts after riding a bit, is this related to coolant issues? I recently replaced the drive oil and have never maintained coolant, I really believe this is my issue, any other ideas?

Leander:
coolant is only for the motor.

your eroors are a battery error (B9)
and Motorcontroller error (S231 (Sevcon))

Smell could well be a collant leak. how is the motor temp?

Navigation

[0] Message Index

[*] Previous page