Author Topic: Chain en sprockets Europa  (Read 1004 times)

Drokz

  • Newbie
  • *
  • Posts: 14
    • View Profile
Chain en sprockets Europa
« on: July 09, 2022, 01:15:13 PM »
Hi,
Its time for change te sprockets and chain...
but the motoshops, cant find them...

Have somebody in europe an solution?

Tanks

bumerang

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: Chain en sprockets Europa
« Reply #1 on: July 10, 2022, 03:55:53 AM »
Hi Drokz,

for my Empulse R 2014, sprockets and chain were changed last year as follows and it works just fine:

K51-32149-38-SLV Kettenrad Alu OZ Marchesini BST Marvic 76/100
Ritzel JT Sprockets JTF1439
DID X-Ring Kette 520 VX3   520VX3X084ZB

bumerang

Drokz

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Chain en sprockets Europa
« Reply #2 on: July 11, 2022, 10:45:59 AM »
Thanks!

have you the orginal teeth used?
14 front and 38 rear?

they not in stock...

bumerang

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: Chain en sprockets Europa
« Reply #3 on: July 11, 2022, 02:27:05 PM »
Yes, original for the empulse 2014. Different years have different equipment afaik. I bought it all at mykettenkit.de and they should be in stock actually.

bumerang

Drokz

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Chain en sprockets Europa
« Reply #4 on: September 10, 2022, 08:37:38 AM »
I got them in!
I had to take the 40 tooth rear sprocket, the others were not in stock.


I just have my doubts, is the aluminum rear sprocket strong enough for that torque?

Eugen

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Chain en sprockets Europa
« Reply #5 on: May 10, 2023, 09:58:19 AM »
Did u know how to switch Miles to Km on dashboard ? sorry for offtop

EV promise

  • Empulse Guru
  • ****
  • Posts: 196
    • View Profile
Re: Chain en sprockets Europa
« Reply #6 on: May 11, 2023, 02:27:51 AM »
I did this to my Empulse, I bought it from Germany and live in the UK. It's some time ago now. I'm a bit vauge on it however.
Make a note of odometer reading.
Put the bike on charge, then press and hold the mode and trip buttons for 2 seconds to go into 'setup mode', ( normally used to set the clock) then press the grey 'start' button on the right handlebar for 2 -3 seconds. Exit setup mode and check odometer.
If this fails, report back and I will do it on mine. Reluctant at the moment.
A Brammo dealer would have used the software connected to the bike.
« Last Edit: May 11, 2023, 02:33:29 AM by EV promise »
Brammo Empulse R 2014
Aprilia Shiver 900 2018
Ducati 750SS 1997

Eugen

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Chain en sprockets Europa
« Reply #7 on: May 16, 2023, 05:56:55 AM »
Hmm setup mode is ok but there are no change still have Miles\F . Tried w connected chardger \ ignition switch on\off . Could you check on you bike (I have US 2.11 firmware version)

EV promise

  • Empulse Guru
  • ****
  • Posts: 196
    • View Profile
Re: Chain en sprockets Europa
« Reply #8 on: May 20, 2023, 08:22:39 AM »
So I have changed mine from miles to kilometers and back a few moments ago. Not quite as I thought.
 Press and hold the mode and trip buttons together and then just 'turn the bike on' with the key. The dials sweep and the screen says ' changing to EU mode' . I released the buttons. After turning it off. I repeated this and this time it says 'changing to UK mode'. The odometer changes and the speedometer shows kph or mph. I don't know if it would work for US models. I can create a short video if anyone wants now I know how.
Sorry it took me so long. I should add mine is firmware ver 2.06.
« Last Edit: May 22, 2023, 05:37:54 AM by EV promise »
Brammo Empulse R 2014
Aprilia Shiver 900 2018
Ducati 750SS 1997