Author Topic: Looking for Brammo Enertia+ Diagnostic software to help keep my bike running  (Read 4416 times)

FrankH

  • Empulse Guru
  • ****
  • Posts: 142
  • First Enertia+ in the Netherlands!
    • View Profile
Hi,

my Enertia+ had its chain and front sprocket replaced at my local dealer, but after they put everything back together the bike won't drive.
It shows a red warning light, but as my dashboard display is not working anymore, we can't see what the error message is.
The dealer doesn't have the original Brammo Enertia+ diagnostics software anymore, and the Victory version doesn't work on Enertias.
Does someone here by any chance know how to get a copy?
Or perhaps software to read the logs on the USB stick, error messages may be in there as well?

It would be a shame to have to scrap the bike because of this.

thanks, Frank

CBke

  • Empulse Guru
  • ****
  • Posts: 112
    • View Profile
    • Email
Hoy,
de invoerder van mijne Enertia+ en ik vermoed ook de uwe was E-LIFESTYLEBIKES.
Mijne Enertia+ heeft, weliswaar lang geleden, een software update gekregen met apparatuur van hun.
Je kan E-LIFESTYLEBIKES contacteren via hun website: http://www.e-lifestylebikes.eu/contact.htm.
Mijne Enertia+ is ook binnen voor tandwielen en ketting, maar de winkel (Ecomobiel) is inmiddels over gegeven en is nu GO4ELECTRIC... Zal nog maar eens een mailke sturen over de status hierover.

Ik hoop dat je met deze info wat verder geraakt.

Wilfried
CBke

FrankH

  • Empulse Guru
  • ****
  • Posts: 142
  • First Enertia+ in the Netherlands!
    • View Profile
So, until now my search has not been successful. The Belgian link posted by Wilfried is out of business, the new owners of the shop he got his E+ don't have the software, and all others I asked haven't even replied.

I found the old link to Enspector, that reads Empulse log files but that doesn't really understand the logs of an Enertia+. So that's a dead end too, I fear.

Any other ideas?

Leander

  • Brammovangelist
  • *****
  • Posts: 206
    • View Profile
    • Email
Did you try revilo (Oliver) in Amsterdam or Marchel from Elektric motorcycles in Barneveld?
Can you pull the log files from an enertia?
maybe I can do something with it. ???

FrankH

  • Empulse Guru
  • ****
  • Posts: 142
  • First Enertia+ in the Netherlands!
    • View Profile
Did you try revilo (Oliver) in Amsterdam or Marchel from Elektric motorcycles in Barneveld?
Can you pull the log files from an enertia?
maybe I can do something with it. ???

Olivier is where my bike is, currently. He replaced the chain and front sprocket. And he doesn't have the software anymore.
Marchel replied yesterday, that he's going to have to look for the software, but hasn't found the time to do so yet.

I've attached some old logs, that I still have on my computer from back in 2013, when I had other errors. There should be an S65 error in those log files somewhere.

Thanks, Frank

Leander

  • Brammovangelist
  • *****
  • Posts: 206
    • View Profile
    • Email
Do you know which software you need? how it's called?
I horded anything I could find from Brammo online.
just maybe I have it :o

FrankH

  • Empulse Guru
  • ****
  • Posts: 142
  • First Enertia+ in the Netherlands!
    • View Profile
No I don't know what it's called, exactly. Something with Vehicle Diagnostics I suppose. And I don't think Brammo would have put this online somewhere, but maybe they have...

MiBa

  • Newbie
  • *
  • Posts: 16
    • View Profile
Hi,
I've stored that "Enertia Diagnostics Installer" SW here:
http://www.environ-systems.de/brammo-empulse-r.html
scroll down to the bottom of the page.


Regards
Michael

FrankH

  • Empulse Guru
  • ****
  • Posts: 142
  • First Enertia+ in the Netherlands!
    • View Profile
Hi Michael, thanks a lot!

I've sent the link to my local dealer, hope he can use it!

best, Frank

nice

  • Enertia Master
  • ***
  • Posts: 55
  • 2 Enertia's Basic 2012
    • View Profile
    • http://niceemotion.nl/
    • Email
Hoi Frank, ik heb de software, for free :)
« Last Edit: June 02, 2020, 08:33:14 AM by nice »
2x Enertia Basic 2012
1x Mobylette AV50 1971
1x Kreidler 50cc Special 1975
1x Simson Schwalbe KR51/2 1986
Tubbergen, Twente, the Netherlands

OM617

  • Newbie
  • *
  • Posts: 8
    • View Profile
I've stored that "Enertia Diagnostics Installer" SW here:
http://www.environ-systems.de/brammo-empulse-r.html

Please, what is the password to the Enertia Diagnostics Installer Application only ZIP?