General > Welcome Forum

Brammo Power Systems battery module

(1/1)

CasaDelGato:
I'm not sure if this is the correct "Brammo" to ask this in....
I'm going to be using some used Brammo Power battery modules in my electric F250.
I'd LOVE to be able to use the existing Battery Management System built into them.
Is there any documentation at all on how to talk to it?
I've attached a photo of the label on the unit

EV promise:
Hi, your photo doesn't really match the motorcycles, however the voltage shows three modules arranged as the image attached. To talk to them you need an interface cable plus some Brammo or Victory software. An image of the top of the module would help. I'm not sure how useful this answer is as the bikes gain all sorts of real time data from the modules which you will not have access too, including turning battery heater's on.

CasaDelGato:
These weren't from a motorcycle.  Some kind of industrial UPS.
View of the BMS board

CasaDelGato:
top view of inside of module

CasaDelGato:
Stack of modules

Navigation

[0] Message Index