Difference between revisions of "Empulse Powertrain Lash"

From Brammo Owners Wiki
Jump to: navigation, search
(Created this page.)
 
m (minor editing.)
Line 1: Line 1:
Riders who are new to the Empulse will notice a jerk when starting the bike from a stop. This is sometimes referred to a "the clunk", but the correct name is "powertrain lash". This page will discuss the causes, and techniques to minimize the lash. It should be stated that the lash is part of the normal operation of a motorcycle transmission and not an indication of a problem with the bike.
+
Riders who are new to the Empulse will notice a jerk when starting the bike from a stop. This is sometimes referred to as "the clunk", but the correct name is "powertrain lash". This page will discuss the causes, and techniques to minimize the lash. It should be stated that the lash is part of the normal operation of a motorcycle transmission and not an indication of a problem with the bike.
  
 
= Causes =
 
= Causes =
Line 20: Line 20:
 
== Dragging the brake ==
 
== Dragging the brake ==
  
Similar to regular ICE bikes, dragging the rear brake when going a low speeds will prevent the transmission bounce.
+
Similar to regular ICE bikes, dragging the rear brake when going at low speeds will mitigate powertrain lash.

Revision as of 09:25, 15 February 2013

Riders who are new to the Empulse will notice a jerk when starting the bike from a stop. This is sometimes referred to as "the clunk", but the correct name is "powertrain lash". This page will discuss the causes, and techniques to minimize the lash. It should be stated that the lash is part of the normal operation of a motorcycle transmission and not an indication of a problem with the bike.

Causes

Triumph Street Triple Gearlash: http://www.youtube.com/watch?feature=player_embedded&v=yKlsInsP7r0

Empulse gearlash: http://www.youtube.com/watch?feature=player_embedded&v=9SZkPI4HUnU

Gearlash internals: http://www.youtube.com/watch?feature=player_embedded&v=mn2p_hYX0io

Remedies

Rollback

When the bike is stopped, push the bike back until you feel the transmission engage. Note that this will be about 6 inches (15 cm), and the feeling of the transmission will be very subtle. Engage the brake and you will be ready to start without any lash.

Dragging the brake

Similar to regular ICE bikes, dragging the rear brake when going at low speeds will mitigate powertrain lash.