Installation of bar end mirrors

From Brammo Owners Wiki
Revision as of 12:23, 22 June 2011 by Brammofan (Talk | contribs)

Jump to: navigation, search

Many Enertia owners have installed bar end mirrors, specifically, the CRG Bar End "Hindsight LS" Mirror. 9of30mirrors.jpg

Although these mirrors are widely available, I purchased mine via Amazon.com at the retail price of $74.95. Installation was fairly easy:

1. Used allen wrench to remove left bar end weight from handlebar.

2. slipped CRG mirror clamp over end of handlebar (had to squish the grip a bit to fit it squarely on the end of the handlebar tube). Tightened mirror clamp.

3. Replaced bar end weight and tightened allen screw.

Visibility is MUCH improved. Brammofan 14:57, 6 August 2010 (UTC)

I finally got around to ordering one for the right side and discovered that it would not fit, due to the throttle. I have ordered the internal adapter and will let you know if that does the trick. (It appears that 9of30 had to do that with his bike). Brammofan 13:23, 22 June 2011 (MDT)

Retrieved from "http://brammoforum.com/wiki/index.php?title=Installation_of_bar_end_mirrors&oldid=186"