Installation of bar end mirrors

From Brammo Owners Wiki
Revision as of 17:54, 24 June 2011 by Brammofan (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Many Enertia owners have installed bar end mirrors, specifically, the CRG Bar End "Hindsight LS" Mirror. 9of30mirrors.jpg

Although these mirrors are widely available, I purchased mine via Amazon.com at the retail price of $74.95. Installation was fairly easy:

1. Used allen wrench to remove left bar end weight from handlebar.

2. slipped CRG mirror clamp over end of handlebar (had to squish the grip a bit to fit it squarely on the end of the handlebar tube). Tightened mirror clamp.

3. Replaced bar end weight and tightened allen screw.

Visibility is MUCH improved. Brammofan 14:57, 6 August 2010 (UTC)

I finally got around to ordering one for the right side and discovered that it would not fit, due to the throttle. I ordered the internal adapter and it fit perfectly. Brammofan 18:54, 24 June 2011 (MDT)

Retrieved from "http://brammoforum.com/wiki/index.php?title=Installation_of_bar_end_mirrors&oldid=187"