Shift Linkage Mod

Thanks to Brammoforum member barboo for this.

"I searched before posting and it seems this hasn't been mentioned yet. I found the existing shift linkage to be a little longer than I liked. I would have to extend my foot a lot upward for up-shifts and hence my up-shifts clunky and not consistently smooth.

I took the existing shift linkage bolt off and cut about 4mm off the end of it and screwed the ends and lock nuts down. Shortening it a touch gave me a little more adjustment as the stock one bottomed out. The shift lever is in a better position for me and up-shifts are much easier.

The picture of the result is below. You'll notice my shift bolt has been shortened from the stock one."

[1]