Frame Slider Recommendations (need to replace after laying down bike)

[jazz999]

Frame Slider Recommendations -  I looked at some past posts but links do not work any longer.  I have some on my current Empulse but after laying it down (car cut me off), one of the sliders bent and there was no markings on it so not sure the brand. 

I also bent in my clutch shifter foot lever.

Thanks

[HadesOmega]

Here's a VLOG I made when I installed mine.  They are by a company TG Bros.  I think I had to use different bolts.  Have not tested them yet =P  FYI the Empulse slider threads are M10 1.5pitch, I wound up crossthreading or rethreading them =P 

I also recently found Victory sliders for sale on ebay for about $40.

[frodus]

Mine were for an SV650, and they worked fine. One was slightly shorter than the other, but ended up being OK.

[Shinysideup]

And I'll bet you can put two large crescent wrenches on that clutch lever and twist it back into place.

[Sabinn]

I have the Brammo branded frame sliders installed. I discovered when I lowsided the bike that those frame sliders didn't even touch the ground. The handlebar grip and rear swing/spool sliders took the hit.

I posted pics of my experience @ http://brammoforum.com/index.php?topic=3651.0


I dont have links to frame sliders, but here are the replacement sliders I opted for. Both are generic and can be found rebranded from several suppliers.

Handlebar: BRAUTO 2pcs CNC Carved Universal Motorcycle Bike 7/8" 22mm Handlebar Grips Bar End Plugs Caps Black
Rear Spools: Motorcycle 8MM Aluminum Carbon Fiber Swingarm Sliders For KAWASAKI ZX10R 2011-2014, ZX6R 2009-2014 Z800 For BMW S1000RR 2009-2014 (Black)

[jazz999]

Thanks everyone!