Author Topic: Portable Battery-to-Enertia charging  (Read 2509 times)

Phantom

  • Brammovangelist
  • *****
  • Posts: 441
    • View Profile
    • Email
Portable Battery-to-Enertia charging
« on: May 29, 2010, 03:10:50 PM »
Would it be possible to charge the Enertia from the following product?

 XPower Powerpack 1500 is a portable power system that can supply up to 1500 watts of household electricity - enough to run almost any electronic product or appliance you might connect to your wall outlet at home.

http://www.alphasolar.com/alpha_solar_133.htm


I was thinking of something like this to solve ebiker's problem of living in a condo with no access to an outlet where he would park his powercycle. This topic came up in the charging FAQ thread.
« Last Edit: May 29, 2010, 03:12:27 PM by Phantom »

BrammoBrian

  • Obsessive Empulsive
  • Brammovangelist
  • *****
  • Posts: 590
  • Director of Product Development - Brammo, Inc.
    • View Profile
    • BRAMMO
    • Email
Re: Portable Battery-to-Enertia charging
« Reply #1 on: May 29, 2010, 06:34:56 PM »
Phantom,

Interesting find.  While it would be possible to charge from this product, it would only get you about a 25% charge at best.  It's a 12V / 60Ah Sealed Lead Acid battery => 12V x 60Ah = 720 Wh (Watt-hours).  The Enertia's battery is 3,100 Wh (Watt-hours) or 3.1 kWh.

So... you'd need five of them to get a full charge! You'd basically be shuffling energy from one battery pack to another, so probably not so efficient.  Good thought though... and maybe still enough to go on a AAA "rescue" truck to get you enough charge to get to an outlet if you're stranded.   

Phantom

  • Brammovangelist
  • *****
  • Posts: 441
    • View Profile
    • Email
Re: Portable Battery-to-Enertia charging
« Reply #2 on: May 29, 2010, 07:33:48 PM »
Thanks for quick answer, Brian. I'll keep looking.