SYSTEM FAULT S82SEVCON - Line Contactor welded

[Seal]

Anyone with this error? or had the error and solve it?

Bike sometimes turns off and appears this error. It can happen when riding or when I go to turn it on to ride.

Open the controller and found a screw not well screwed, thinking was that but no.

Happen again.

Please help.

[cybergodzilla]

I now have Error  S82 as well and have not been able to get my bike started =/

CyberG, from SoCal
2014 Brammo Empulse

[frodus]

Find the contactor and give it a good tap. If it's welded shut, it is closed, and the controller is powered when it shouldn't be.

[cybergodzilla]

Took it to Indian Motorcycles of Orange County, Westminister, CA. Like Frodus stated, the problem was the amin contactor; however that part had to be bought as part of an larger assembly.
ASM-CVR,CONTROLLER, 2413378
As I don't know how this part failed. I'm going to start the bike by the book. I was starting my bike by pushing the Start button immediately, as I turned the key. (leaving the switch in run at all times)
Can't be too careful =/
CyberG