I want to buy original accesories for Brammo Enertia Plus

[KaFr]

Hello everyone,
I would like to buy the following original accessories for Brammo Enertia Plus:
- Brammo central stand
- Brammo windshield
- Givi side cases including holders
It does not have to be new, just used if it is in good condition.
Do not you know where you can find it?
Thanks in advance for any tip.

[KaFr]

I also pick up three or four fully functional Valence U1-12XP batteries for Brammo Enertia Basic.

[KaFr]

Hi,
it looks like it's impossible to get original accessories for Brammo Enertia :-(

I've already got a windshield from Puig and I think it looks pretty good.

Still, I do not have side cases that I'd like to use. I guess I'll have to make the case holders somewhere. Could anyone please take a picture of your suitcase holders and measure their dimensions?

My consideration is that I would use the Givi brackets from another motorcycle and weld on the brackets to fit the Brammo Enertia. I would like to buy the trunks Givi E22.

[KaFr]

Here the photomontage of Enertia and Givi E22 trunks.

[Drivingthefuture]

Did you already buy the batteries or you would like to buy some? If I can't get my bike to talk to motor controller I can sell you my batteries. They are super healthy and do not have a lot of cycles

[KaFr]

I bought the Brammo Enertia Basic 2012 with four faulty batteries in Belgium in June 2018. I thought the faulty batteries would go to repair. I have a friend who could repair the battery, but the repair price is too high (about 270EUR / 300USD per battery).

I also thought that if it is not possible to repair the batteries, I will be able to use Brammo Enertia Basic as a source of spare parts for my Brammo Enertia Plus 2013 in the future. Unfortunately, I found that lots of parts are not the same (charger, motor, controller, etc.) . For this reason, I decided to sell Enertia Basic. Either complete or individual parts.

I'm in touch with a guy from Germany who needs my two working batteries. If you're interested, I can sell you some spare parts you need. It depends on where you are from, that transport is not very expensive. I am from the Czech Republic, Central Europe.

[FrankH]

Could anyone please take a picture of your suitcase holders and measure their dimensions?

I took a picture (attached) of my side bag holder. Some dimensions added, what else do you want measured? These came with the soft saddle bags option when Brammo was still selling those. Those bags are almost gone (zippers broken) but I still use one on the left to hold my lock and charge adapter.

[KaFr]

Thanks a lot for the basic dimensions of the bracket.
I think the holder base will be the same as the Givi case holder.

Would you please measure also the following dimensions:
- the length of the main pipe from the axis of the two screws
- the distance of the main tube axis from the top edge of the light holder
- pitch between the main tubes axis of both holders
- pipe diameters
- tube material (steel or aluminum?)

[Drivingthefuture]

Do you think the motor controller is working? Only ones on eBay are $675 which is half of what I paid for my bike so not worth it.

[KaFr]

Only four batteries are defective, all other components are fully functional.

[Drivingthefuture]

I would like to buy your motor controller, how much do you want for it?

[KaFr]

Hi Drivingthefuture,
do you have Enertia Basic or Legacy?
I have Basic version made in Hungary 2012.
Is the part you need Sevcon controller?
Do you know part number?
Are you from US or Europe?

[Drivingthefuture]

From U.S. , 2010 Enertia , controller I need is this one: