Hi All, The log files for a Victory Empulse TT 2016 are showing one fault in charging mode (#1 below) and one in driving mode (#2 below).
Fault #1: After sitting on the charger for a couple days past 100% SOC, the log shows the fault "SYSTEM FAULT B62 : Battery Fault: One or more Heaters Failed". The fault seems to stem from "M2 Heater Current Bad Bits" which as logged this: .... ...!. Once this happened, this fault started.
The heaters seemed to be working just fine for a couple days while it was charging from 75-100% SOC and also worked fine after the motorcycle was turned on/off and driven post-charging.
Fault#2: "SERVICE MODE : Diagnostic Cable Connected" - this shows up continuously but only in the drive log but doesn't seem to impact the ability to drive.
I searched back through the older logs, Fault #2 may be caused by cold ambient temps?! Though this doesn't make a lot of sense.
Has anyone had anything like #1 and #2 above?
Thanks a lot for your help
