Author Topic: Licence plate holder mod  (Read 1371 times)

KaFr

  • Brammovangelist
  • *****
  • Posts: 304
    • View Profile
    • Email
Licence plate holder mod
« on: April 02, 2021, 08:22:02 PM »
We have a bigger license plate in our country than in the USA. I therefore had to modify the original holder. This modification took place by peeling off the red rear reflector, because it was covered by the holder of the Czech license plate. I will stick this red reflector on the additional holder, which will be attached under the new license plate holder. Furthermore, due to different regulations in our country, I had to change the color of the rear side reflectors from red to orange.

edit: finally I sticked the red reflector directly on the Czech license plate holder
« Last Edit: April 03, 2021, 06:53:45 AM by KaFr »
Ovaobike MCR-M 2022 #24
Victory Empulse TT 2016 #150
Brammo Enertia Plus 2013 #205
Peugeot E-Vivacity 2012 #978
Renault Fluence Z.E. 2012

KaFr

  • Brammovangelist
  • *****
  • Posts: 304
    • View Profile
    • Email
Re: Licence plate holder mod
« Reply #1 on: April 12, 2021, 11:15:07 AM »
I made a small improvement to the red rear reflector. I replaced the original rectangular reflector with a reflector with a slimmer shape. I think it looks a little better now.  :)
« Last Edit: April 12, 2021, 11:20:47 AM by KaFr »
Ovaobike MCR-M 2022 #24
Victory Empulse TT 2016 #150
Brammo Enertia Plus 2013 #205
Peugeot E-Vivacity 2012 #978
Renault Fluence Z.E. 2012

KaFr

  • Brammovangelist
  • *****
  • Posts: 304
    • View Profile
    • Email
Re: Licence plate holder mod
« Reply #2 on: May 06, 2021, 05:33:49 PM »
Finally, I have a Czech license plate on my Victory Empulse TT.  8)
The letters EL are reserved for electric vehicles in our country.
Ovaobike MCR-M 2022 #24
Victory Empulse TT 2016 #150
Brammo Enertia Plus 2013 #205
Peugeot E-Vivacity 2012 #978
Renault Fluence Z.E. 2012