Free L2 EVSE

[siai47]

If you want to increase your charging speed by moving to a 240 circuit, you can modify the existing EVSE provided with the Victory Empulse.  This is a clipper creek unit with the same "guts" as shown in the attached you-tube video.  The only difference is the EVSE for the Empulse is put together with 4 Phillips screws, not 6 tamper proof Torx as shown in the video.  The only cost is the plug and a short piece of wire.  Be aware if you make this mod, you need to have a 4 wire (two hots, neutral and ground) circuit.  The 120 (hot-neutral) connection is required to provide the 120 volt control voltage.

http://redirect.viglink.com/?format=go&jsonp=vglnk_149303704637614&key=782481d7a66a5fd5ab6ccd47e835c10b&libId=j1w2whrz01000a2v000DAlncxps8r&loc=http%3A%2F%2Fgm-volt.com%2Fforum%2Fshowthread.php%3F146977-Video-that-shows-how-to-modify-Voltec-L1-EVSE-to-do-L1-and-L2&v=1&out=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DD2-_pfCtPu4&ref=http%3A%2F%2Fgm-volt.com%2Fforum%2Fsearch.php%3Fsearchid%3D59711482&title=Video%20that%20shows%20how%20to%20modify%20Voltec%20L1%20EVSE%20to%20do%20L1%20and%20L2&txt=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DD2-_pfCtPu4