Updating firmware for Battery Modules: Comm Firmware, BMP Firmware, BMP Conf

[new-brammo-guy]

Does anyone know where to find these updated battery module firmware files (see attached software used to update once I have the files):
1. Comm Firmware
2. BMP Firmware
3. BMP Configuration

I have the dongles and connectors for both the CANbus and RS485.

The "Calibration" files are here and described below - but none are for the battery module firmware.

http://polaris.diagsys.com/modules.php?name=Downloads&d_op=viewdownload&cid=45

Here are the 6 "Calibration" files and versions
#1: Motor Controller
19680795_SN0076-07_0x3f53.dld
SN0076.07 ROM
checksum: 0x3f53

#2: BMC
54302376_8x_00m67_FIRMWARE_BMS.BIN
87.00.67

#3: VCU F130
75516491_VCU2V2m26.bin
05.02.26

#4 M.C. Configuration
77218397_02_SCFG_0076-07_0x6e21.dcf

#5: VCU CPI 506
89210795_CPIV1_22.BIN
01.01.22

#6 Display / Dash
92906016_2_11_FIRMWARE_DASH_ICU.BIN
01.02.11
VCU F130

[new-brammo-guy]

I found a clue:
I took the attached screenshot from the Victory Manual.

Looks like the files were downloaded and in a folder "BPM 1590", which is the battery module name. But I can't find any of those files.

Anyone else find those files?

Thanks a lot

[EV promise]

Hi , I have the files that go with the document below, but not sure if there what you're looking for, as there in a Brammo Empulse 2014.5 release. They are in a BPM1590 folder. I have no Victory files, only the diagnostic software to some extent.

[new-brammo-guy]

Thanks EV Promise. Could you please send me the files listed below from your .pdf?

It seems that my Victory Files are the same except the BCP Firmware (yours is version 05.01.03 while my Victory is 15.01.06). I'd like to explore the .xml files in particular since they might be viewable with a text editor.

BCP Firmware
94130704_P5SV1M03.BIN
05.01.03

BMP Firmware
58252143_FW_0002_0200_6000_0803.enc.brm.xml
0x12e4

BMP Configuration
95498989_D_03_BPM1590_2013-01- 24_0803enc_Chem9245_idle_to_2000mA.xml
95498989 D.03

[EV promise]

Hi, files attached. They came from this site in a Brammo zip file. There's an instruction pdf also but to large to zip. Hope this helps.

[new-brammo-guy]

Awesome - thanks EV promise. I found "Firmware Block.rar" with a bunch of goodies including the files you listed (see attached for the folders in the .rar file, download the 11MB file below). The files are all for older Brammo bikes (not Victory) though.

There are also a bunch of interesting .pdfs in there with release notes.

https://drive.google.com/file/d/1E4aWsdHBEBRpX6xa7N_01iwU0RZda3H4/view?usp=sharing

[EV promise]

Yes, that's the one. Lots of great info etc. Will you be taking your battery apart or seeing how Korbin progresses?
Notes say temp chip is connected to F506 chip. (U15). We need to find it. Might have 5 legs.

[new-brammo-guy]

EV promise, I haven't decided what I'll do with my Victory Empulse... still seeing my options - right now, a fun bike is bricked on a beautiful sunny day - so sad!

[Korbin Dallas]

I was planning on going to the polaris dealer later this week to see if i can talk them into letting me download the firmware from digital wrench. Does anyone have access to digital wrench?

[new-brammo-guy]

Oh, that'd be great. I only know of the online one, which (as mentioned) oddly doesn't have the battery module firmware, etc. http://polaris.diagsys.com/modules.php?name=Downloads&d_op=viewdownload&cid=44

Hopefully someone on the forum has connections to former Brammo engineers.

[EV promise]

Hi, files were on Polaris website but we'll hidden. I've posted them on the B40 fault B8 system fault post with a pdf that hopefully explains everything. Hope it what you're both looking for. Bikes will run again.