« previous next »
Pages: [1]

Author Topic: Alain's empulse mods  (Read 3057 times)

alain

  • Newbie
  • *
  • Posts: 15
  • If you don't hear anything... Try full throttle
    • View Profile
Alain's empulse mods
« on: September 21, 2015, 02:28:53 AM »
After doing some repair work on my empulse after a stupid accident, I decided to draw the Line a little further and modify some thing that were on my wish list since buying "my precious".
It still is a work in progress, but a few photos show the general idea. More to follow...

http://1drv.ms/1FWTpsY
Logged

littlefreak3000

  • Brammovangelist
  • *****
  • Posts: 203
    • View Profile
Re: Alain's empulse mods
« Reply #1 on: September 21, 2015, 10:10:05 AM »
I'll be doing similar things when I get my bike back from the shop.
Logged

Consultec

  • Empulse Guru
  • ****
  • Posts: 149
    • View Profile
Re: Alain's empulse mods
« Reply #2 on: September 21, 2015, 08:01:13 PM »
Did you painted with Automotive paint or HomeDepot stuff :-)
Logged
2014 Empulse R (Red), 2010 Enertia (Burnt Orange), 2000 BMW R1200C, 2010 Enertia (Red) coming for wife.

littlefreak3000

  • Brammovangelist
  • *****
  • Posts: 203
    • View Profile
Re: Alain's empulse mods
« Reply #3 on: September 21, 2015, 08:47:40 PM »
I think I'm gonna get a gallon of Real Red Pearl plastidip from dipyourcar.com to spray my plastics.

http://www.dipyourcar.com/Preloaded-Quart-SM.html

So kind of half way between Automotive paint and Home Depot stuff. Also plastidip is removable.
Logged

Consultec

  • Empulse Guru
  • ****
  • Posts: 149
    • View Profile
Re: Alain's empulse mods
« Reply #4 on: September 22, 2015, 01:47:30 AM »
I want to do the automotive or motorcycle wrap..
Logged
2014 Empulse R (Red), 2010 Enertia (Burnt Orange), 2000 BMW R1200C, 2010 Enertia (Red) coming for wife.

alain

  • Newbie
  • *
  • Posts: 15
  • If you don't hear anything... Try full throttle
    • View Profile
Re: Alain's empulse mods
« Reply #5 on: September 22, 2015, 03:53:08 AM »
Quote from: Consultec on September 21, 2015, 08:01:13 PM
Did you painted with Automotive paint or HomeDepot stuff :-)

Nope. 3m 1080 vinyl wrap. White carbon fiber and red reflecting rim stickers for the stripings. It was a pain in the butt to cover the fairings. Tank fairing took about 8 hours. I just hope it will hold a couple of years. I have no experience whatsoever, but with the right preparation, tools and hours of youtube...
Did repaint the bull's head logo with 2k spray paint, brand spray max. It's now completely covered in matte black (5%). I'll post the pictures as soon as I got them mounted since I'm still waiting for the double sided adhesive.
Logged

alain

  • Newbie
  • *
  • Posts: 15
  • If you don't hear anything... Try full throttle
    • View Profile
Re: Alain's empulse mods
« Reply #6 on: September 22, 2015, 03:58:54 AM »
Quote from: littlefreak3000 on September 21, 2015, 08:47:40 PM
I think I'm gonna get a gallon of Real Red Pearl plastidip from dipyourcar.com to spray my plastics.

http://www.dipyourcar.com/Preloaded-Quart-SM.html

So kind of half way between Automotive paint and Home Depot stuff. Also plastidip is removable.

Sweet! A lot cheaper than vinyl... And faster results. Also, should last long (if done properly).
Be sure to post some pics when done.
Logged

alain

  • Newbie
  • *
  • Posts: 15
  • If you don't hear anything... Try full throttle
    • View Profile
Re: Alain's empulse mods
« Reply #7 on: September 23, 2015, 12:20:16 PM »
Final result :

[smg id=412 type=preview align=center width=400]

[smg id=413 type=preview align=center width=400]

[smg id=414 type=preview align=center width=400]

[smg id=415 type=preview align=center width=400]

[smg id=416 type=preview align=center width=400]

[smg id=417 type=preview align=center width=400]



Logged

Consultec

  • Empulse Guru
  • ****
  • Posts: 149
    • View Profile
Re: Alain's empulse mods
« Reply #8 on: September 23, 2015, 04:03:27 PM »
Nice.. How hard was the wrap? Trying to get the bubbles out?
Logged
2014 Empulse R (Red), 2010 Enertia (Burnt Orange), 2000 BMW R1200C, 2010 Enertia (Red) coming for wife.

alain

  • Newbie
  • *
  • Posts: 15
  • If you don't hear anything... Try full throttle
    • View Profile
Re: Alain's empulse mods
« Reply #9 on: September 23, 2015, 05:25:39 PM »
Quote from: Consultec on September 23, 2015, 04:03:27 PM
Nice.. How hard was the wrap? Trying to get the bubbles out?

Clearing out the bubbles was not hard at all. And due to the carbon structure of the wrap a needle could be used to remove trapped air if necessary. Folds and the risk of overstretching were harder to manage since there are many curves and corners to handle. The "tank" had to be done in 2 pieces (left and right) The stripings came in handy to cover the overlap.
Don't think I will do it again some day soon. Vinyl wrap is great for the "uncomplicated" surfaces like the hood of a car.
Logged

Consultec

  • Empulse Guru
  • ****
  • Posts: 149
    • View Profile
Re: Alain's empulse mods
« Reply #10 on: September 23, 2015, 09:07:46 PM »
Nice job.  I see you also added the pinstrip on the wheels.
Logged
2014 Empulse R (Red), 2010 Enertia (Burnt Orange), 2000 BMW R1200C, 2010 Enertia (Red) coming for wife.

BrammoBrian

  • Obsessive Empulsive
  • Brammovangelist
  • *****
  • Posts: 590
  • Director of Product Development - Brammo, Inc.
    • View Profile
    • BRAMMO
    • Email
Re: Alain's empulse mods
« Reply #11 on: October 06, 2015, 09:34:23 AM »
Looks awesome!  Nice work with the wrap.   8)
Logged
Pages: [1]
« previous next »