Author Topic: Zx6r Seat and fairing  (Read 4800 times)

mariobelgium

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Zx6r Seat and fairing
« on: June 30, 2019, 02:06:47 PM »
Hi Guys

Done Some heavy modifications to my Brammo,
what do you think of it?

Brammofan

  • Administrator
  • Brammovangelist
  • *****
  • Posts: 3257
  • Following the momentum of Enertia
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #1 on: June 30, 2019, 02:08:13 PM »
This is my new favorite thing.
The Brammoforum Wiki is still active: http://www.brammoforum.com/wiki

mariobelgium

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #2 on: June 30, 2019, 02:33:09 PM »
Here’s the front

mariobelgium

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #3 on: June 30, 2019, 02:36:03 PM »
Reposition the original charger to below to make a storagebox under the seat.
It has also 2 extra chargers so that i can charge at 9kw

Ultratoad

  • Empulse Guru
  • ****
  • Posts: 174
    • View Profile
Re: Zx6r Seat and fairing
« Reply #4 on: June 30, 2019, 03:08:39 PM »
Pretty hard to complain about perfection....  Well done....

HadesOmega

  • Brammovangelist
  • *****
  • Posts: 908
  • #139
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #5 on: July 01, 2019, 03:02:58 PM »
Wow sweet doesn't even look like an Empulse anymore.  If Brammo was to make a sporty Empulse that's what it would look like.  Looks good.  If you paint the spring green to match would be nicer.

Is the ride much quieter?  One of my complaints about the Empulse is the aerodynamics and how noisey the ride is even with a windscreen.

One of the few fully fairing Empulse is the Victory Isle of Man racebike
« Last Edit: July 01, 2019, 03:05:01 PM by HadesOmega »
2016 Victory Empulse TT - #139

mariobelgium

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #6 on: July 01, 2019, 03:26:01 PM »
The ride is a bit quieter because a hear other sounds now.but a lot less wind on my chest on the freeway so a much more comfy ride.done some testing if i go flat on the “tank” with 120km/h its uses 2to 3kw less.next month i go for a 180/60 rear tire to have a bit more topspeed to.now i go to nearly 7000rpm on topspeed.and i found out the tachometer stops at 199km/h.
About the empulse rr,i was willing to pay a lot of money to have one.unfortunally they were never sold to public.so thats the closest we can come to build one ourself.

Leander

  • Brammovangelist
  • *****
  • Posts: 208
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #7 on: July 02, 2019, 03:10:10 AM »
very nice! 8)

what did it take to fit and mount the fairing?
and what made you decide on this one?

hyperpro spring (purple) would look sweet imho.

are you going to race it?

ik vind hem super vet :D
« Last Edit: July 02, 2019, 03:17:04 AM by Leander »

shayan

  • Enertia Master
  • ***
  • Posts: 98
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #8 on: July 03, 2019, 01:47:02 AM »
Wow this is awesome!

Just curious, what are the extra 2 chargers that you're using?

-Shayan

jazz999

  • Empulse Guru
  • ****
  • Posts: 183
    • View Profile
Re: Zx6r Seat and fairing
« Reply #9 on: July 04, 2019, 04:17:32 PM »
Wow impressive!  I would buy that conversion kit if it was available  :)

mariobelgium

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #10 on: July 05, 2019, 01:54:56 PM »
Have not taken it to the circuit and was planning not to do so,have an other trackbike.
But in August is the first open electric superbike race at the tt-circuit in Assen netherlands.  So that i dont wanna mis riding at the gp and wsbk track against energica’s and zero’s.   

mariobelgium

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #11 on: July 05, 2019, 01:57:44 PM »
And about the extra chargers, its from Lennart Otten in germany.  I think they are from diginow but not sure.  They are working great, a full charge in less than an hour!!!!!! 

shayan

  • Enertia Master
  • ***
  • Posts: 98
    • View Profile
    • Email
Re: Zx6r Seat and fairing
« Reply #12 on: July 17, 2019, 12:08:10 AM »
@mariobelgium

Do you have more pictures of the chargers and the way the connections have been made? Based on the way you have set it up, I would be willing to make the same changes on my bike.

Thanks
-Shayan