Author Topic: LED indicator DIY video  (Read 1980 times)

BrammoBelgium

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • Email
LED indicator DIY video
« on: April 02, 2015, 07:53:57 AM »
Hi, i made a little how to video about the conversion to LED indicators on my Brammo Empulse. I didn't use any resistor because i replaced the indicator relay with an LED indicator.

https://www.youtube.com/watch?v=mMLNpcQHcCY

Shinysideup

  • Brammovangelist
  • *****
  • Posts: 1423
    • View Profile
Re: LED indicator DIY video
« Reply #1 on: April 02, 2015, 02:55:36 PM »
Nice  video. I didn't know they even made a relay especially to handle LED's. Slick!

BrammoBelgium

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • Email
Re: LED indicator DIY video
« Reply #2 on: April 03, 2015, 08:21:40 AM »
I know it was possible for an enertia and i heard about somebody in Switzerland who did it.
It's very easy and you don't have add resistors or change your current indicator housings.

kingcharles

  • Empulse E1 80-MF-DR
  • Brammovangelist
  • *****
  • Posts: 544
    • View Profile
LED indicator DIY video
« Reply #3 on: April 03, 2015, 02:53:39 PM »
Thanks for the video!
I already ordered the LED's and relay.

Can you do a video for the rear/brake lights too? :-)
Once you go EV, gas is history!

BrammoBelgium

  • Newbie
  • *
  • Posts: 17
    • View Profile
    • Email
Re: LED indicator DIY video
« Reply #4 on: April 04, 2015, 04:51:08 AM »
My Empulse had the led rear light from factory. So unfortunately i cannot help you with the rear light.

Consultec

  • Empulse Guru
  • ****
  • Posts: 149
    • View Profile
LED indicator DIY video
« Reply #5 on: September 24, 2015, 09:24:00 AM »
The bulbs and the installed pic. Next I need to added the relays. 


Sent from my iPad using Tapatalk
2014 Empulse R (Red), 2010 Enertia (Burnt Orange), 2000 BMW R1200C, 2010 Enertia (Red) coming for wife.

Consultec

  • Empulse Guru
  • ****
  • Posts: 149
    • View Profile
LED indicator DIY video
« Reply #6 on: September 30, 2015, 01:01:43 AM »
I added the relay and it fixed my led issue. 


Sent from my iPad using Tapatalk
2014 Empulse R (Red), 2010 Enertia (Burnt Orange), 2000 BMW R1200C, 2010 Enertia (Red) coming for wife.