« previous next »
Pages: [1]

Author Topic: Dropped. Doesn't look like a big deal, what do you think?  (Read 2224 times)

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Dropped. Doesn't look like a big deal, what do you think?
« on: July 21, 2018, 03:04:51 PM »
Today I dropped my bike. From a dead stop in the intersection, I rolled forward in 3rd gear leaning left. The rear tire spun under me and whipped the rear of the bike. This was right after I performed an oil change, my guess is I somehow got oil on the read tire edge. This was right outside my home, made this turn a million times, anyway...

Looking to replace a few components and would like some guidance.
  • grip end cap
  • shifter
I'm concerned about the housing. Looking at it you can see obvious drop damage. My gut tells me it's built to withstand a single ultra low speed drop but I'd like to hear your input. I have included a series of 7 pics to show the damage. As you can see most of the damage was to my pride.

Please share your thoughts and suggestions (links) to replacement parts. :)

full Left view
 Left grip
 Left Slider ... completely untouched
 shifter and housing view 1
shifter and housing view 2
view from rear
Left rear bobbin
Logged

Leander

  • Brammovangelist
  • *****
  • Posts: 208
    • View Profile
    • Email
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #1 on: July 22, 2018, 03:03:57 PM »
which model year is this?
and what version?
Logged

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #2 on: July 22, 2018, 04:53:33 PM »
2014 Empulse (non R)
Logged

cybergodzilla

  • Enertia Master
  • ***
  • Posts: 43
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #3 on: July 23, 2018, 12:05:14 PM »
You need to look up Part#1021957, ASM-SHIFTER,FOOT and you may need to install a bushing... =/

When Brammo was around this was a $20 part, for the full assembly...

http://brammoforum.com/index.php?topic=2220.0

Cyber, from SoCal
2014 Brammo Empulse
Logged
2014 Empulse =D
2014 CBR650F B-)
2014 CFR250L =O

Ultratoad

  • Empulse Guru
  • ****
  • Posts: 174
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #4 on: July 23, 2018, 09:45:43 PM »
I had a shift lever that looks just like yours !!!!  The new lever comes WITHOUT the required bushing....  I was able to press the bushing out of the old and install into the new with perfect results....  You WILL need a press....
Logged

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #5 on: July 24, 2018, 10:07:22 AM »
In the attached exploded view, which number is the bushing?
Logged

HadesOmega

  • Brammovangelist
  • *****
  • Posts: 908
  • #139
    • View Profile
    • Email
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #6 on: July 24, 2018, 02:42:57 PM »
That sux I had something very similar happen to me on my Kawasaki ZR7 because of cold weather and having a rear racing tire.

Bushing looks like #24 #27, looks like a lotta trouble to replace a shift lever O_o'

Looks #23 is the shifter assembly

https://www.cheapcycleparts.com/oemparts/a/vic/5678f88f87a86611bc5d1611/final-drive-gear-shift-control#
« Last Edit: July 24, 2018, 08:16:14 PM by HadesOmega »
Logged
2016 Victory Empulse TT - #139

cybergodzilla

  • Enertia Master
  • ***
  • Posts: 43
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #7 on: July 24, 2018, 03:16:05 PM »
Bushing is #27 on the picture.
Logged
2014 Empulse =D
2014 CBR650F B-)
2014 CFR250L =O

HadesOmega

  • Brammovangelist
  • *****
  • Posts: 908
  • #139
    • View Profile
    • Email
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #8 on: July 24, 2018, 08:15:37 PM »
Oh yeah sorry that was the part of the footpeg that mounts to the bushing
Logged
2016 Victory Empulse TT - #139

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #9 on: August 02, 2018, 03:15:29 PM »
I bought the shifter via the official Victory part site. Just got an email saying it's on backorder. What do you think the odds are they're going to be able to mail me that shifter?
Logged

Brammofan

  • Administrator
  • Brammovangelist
  • *****
  • Posts: 3257
  • Following the momentum of Enertia
    • View Profile
    • Email
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #10 on: August 02, 2018, 03:16:29 PM »
Man... good luck with that. Please keep us posted, either way.
Logged
The Brammoforum Wiki is still active: http://www.brammoforum.com/wiki

HadesOmega

  • Brammovangelist
  • *****
  • Posts: 908
  • #139
    • View Profile
    • Email
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #11 on: August 03, 2018, 02:55:05 AM »
Have you tried to bend it back for the meantime?  Or maybe cut it off and weld it back on?
Logged
2016 Victory Empulse TT - #139

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #12 on: August 06, 2018, 03:42:18 AM »
Quote from: HadesOmega on August 03, 2018, 02:55:05 AM
Have you tried to bend it back for the meantime?  Or maybe cut it off and weld it back on?
Sure did! It's usable. I just want it back to legit status again :)
Logged

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #13 on: August 09, 2018, 09:58:52 AM »
Quote from: Brammofan on August 02, 2018, 03:16:29 PM
Man... good luck with that. Please keep us posted, either way.

I just received an email notice stating the part has shipped. Gigitty!
Logged

Sabinn

  • Enertia Master
  • ***
  • Posts: 41
    • View Profile
Re: Dropped. Doesn't look like a big deal, what do you think?
« Reply #14 on: August 16, 2018, 10:58:06 AM »
Aug 1 - ordered shifter
Aug 2 - Victory notified me the shifter was on back order
Aug 9 - Victory notified me the shifter was now shipped.
Aug 15 - part arrived. HURRAY!
Logged
Pages: [1]
« previous next »